General
Orders ship in 1-2 business days from Indiana. U.S. delivery typically takes 2–5 business days after shipment.
Yes — we ship worldwide. Shipping within the continental US is free. International shipping rates and delivery times vary by country.
We are based in Indiana, USA, and ship all orders directly from our Indiana facility.
LED Backlighting Sheets
All of our LED sheets operate on 24V DC and require a compatible power supply.
Yes. Please use a compatible 24V controller or power supply.
Yes. Our LED sheets can flex slightly to follow curves and fit irregular surfaces. They can also wrap around a 90-degree edge to light up a mitered stone edge. Avoid folding the sheet back onto itself to prevent damage.
They’re ideal for translucent materials like onyx, quartzite, marble, and glass panels.
Yes, along the marked cut lines (grey). They can be cut vertically, horizontally, or diagonally. We recommend you use scissors for a straight & even cut.
Yes. The LED sheets have 10 pre-soldered connector points, but only 2 are required to power the sheet. If you need to remove unused connectors, they can be gently twisted off for a cleaner installation.
Our LED sheets are rated for up to 50,000 hours of use under normal operating conditions.
Power Supplies
We only use, sell, and recommend Mean Well power supplies for their proven reliability and performance with our LED sheets
Yes. Mean Well power supplies have built-in short-circuit protection. If triggered, the unit will automatically reset after being unplugged for 5–10 minutes. The most common areas for shorts are if the sheets have not been cut properly, 2 cut edges meet, or separation sheets are too close together (.25" gap recommended)
Yes . It can be directly hardwired into your electrical system if preferred. We recommend having a licensed electrician perform the installation.
The power supply is designed to work with a toggle on/off switch only. It cannot be connected directly to a wall dimmer switch.
LED Controllers
Each controller can control up to 8 LED sheets.
Yes.
- 450W power supply, you can connect up to 2 controllers (max 16 sheets total)
- 600W power supply, you can connect up to 3 controllers (max 20 sheets total)
Yes. You can pair as many controllers as you’d like to each zone within a 30m distance.
- Make sure the remote has two AAA batteries installed.
- Unplug the power from the controller for 10 seconds.
- Choose the desired zone number (1–4). Above that number is a small vertical line; press it 3 times to pair.
- Once paired, the lights will blink.